Quick Answer: What is the applicable code and standard for portable fire extinguishers?

What is the reference standard for portable fire extinguishers?

Select, use, and maintain portable fire extinguishers that are appropriate to the hazard. Don’t work without the latest edition of NFPA 10. Portable fire extinguishers are a critical first line of defense against small fires.

What is code for fire extinguishers?

(1) A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the floor area, or fraction thereof. Where the floor area is less than 3,000 square feet at least one extinguisher shall be provided.

Is code of portable fire extinguisher?

The details in regard to the maintenance are given in IS 2190 : 1992 ‘Code of practice for selection, installation and maintenance of portable first aid fire extinguishers ( third revision )’.

What is the OSHA standard for fire extinguishers?

NFPA recommends one 2-A fire extinguisher for every 3,000 square feet. OSHA requires employees to have access to an extinguisher within 75 feet. Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below).

THIS IS IMPORTANT:  You asked: What is the first thing you do when you pick up a fire extinguisher?

What does NFPA 10 say?

NFPA 10 provides requirements to ensure that portable fire extinguishers will work as intended to provide a first line of defense against fires of limited size.

What is the standard shape used to identify a portable fire extinguisher used for flammable liquid fires?

According to NFPA, extinguishers suitable for Class A fires should be identified by a triangle containing the letter “A.” If in color, the triangle should be green. Class B fire extinguishers are used for flammable liquid and gas fires such as oil, gasoline, etc.

Is standard of fire extinguisher?

11.5

SI No. Type of Extinguisher Type of Fires
(1) (2) (3)
ii) Fire extinguisher, water type (stored pressure), IS 6234 NS
iii) Fire extinguisher, mechanical foam type (gas cartridge), IS 10204 and IS 13386 NS
iv) Fire extinguisher, mechanical foam type (stored pressure), IS 14951 and IS 15397 NS

Is standard for fire extinguisher refilling?

The recharging period of water type fire extinguisher is usually 5 years and for foam types it is 2 to 3 years. While this is a known fact only a professional fire extinguisher recharge service provider can help you in refilling of fire extinguishers correctly.

Is it a legal requirement to have fire extinguishers?

The regulations state that a minimum of two Class A fire extinguishers on every floor of a building are needed, unless the premises are very small, in which case one may be acceptable. … If there is a sprinkler or automatic suppression system in place, fewer fire extinguishers may be required.

Is standard for modular fire extinguisher?

SAFEX Automatic ABC Dry Chemical Powder or Clean Agent Gas & other gaseous Fire Extinguishers is a technological break through that provides automatic fire protection for electrical and electronic flammable liquid and variety of other risks. … The Modular type Extinguisher is based on Sprinkler technology.

THIS IS IMPORTANT:  How long does it take to become a fully qualified firefighter?

Is standard for ABC fire extinguisher?

The extinguisher shall be marked with the letter ‘A’, ‘B’ and ‘C’ indicating their suitability for respective classes of fires as laid down in IS 2190 depending upon the powder conforming to IS 4308 or IS 14609 for class BC & class ABC respectively which is filled in the extinguisher.

Is standard for fire?

Bureau of Indian Standards is the National Standard Body of India established under the BIS Act 2016. This statutory body is responsible for development of codes/ standards, marking and quality certification of goods etc.

Indian Standards On Fire Safety.

SN Code Title
2 8757:1999 Glossary of terms associated with fire safety

Which is a minimum requirement for service of a portable fire extinguisher by an employer?

Employers need to perform a full maintenance check on their workplace’s portable fire extinguishers once per year, according to OSHA 29 CFR 1910.157(e)(3). “Maintenance” means a thorough examination and repair, as needed, of all your facility’s portable fire extinguishers, as covered in NFPA 10(98), Sec. 4-4.

What is the height requirement for fire extinguishers?

Installation height

Extinguishers need to be installed at least 4 inches off the ground up to a maximum of 5ft.