Why can’t I light my propane fire pit?

When the pilot won’t light, you can often trace the problem to a lack of propane, either because the tank is empty or a valve is closed. If the pilot won’t stay lit, the problem is usually related to the thermocouple, a heat-sensitive electrode that signals the gas valve to stay open when the pilot is on.

Why is my fire pit not working?

Narrowing down the possible issues that might be contributing to the failure of your firepit can range from an incomplete installation, an insufficient fuel supply, loose lines or fittings, strong breezes, or even mishandling or neglecting to maintain your fire feature.

Can you manually light a propane fire pit?

If you have a manually lighting propane fire pit, use a lighter or match that has a long reach. … Always shut off both the control valve on the fire pit and the valve on the propane tank. If your fire pit’s electric starter fails, remember you can still light your fire pit with a match or stick lighter.

Why is my gas fire pit not lighting?

If your gas fire pit lights but doesn’t stay lit, this can also be a result of dirty ports or faulty valves. Check those and then examine the pit’s location. … If it doesn’t and you have spark but no pilot light, the issue often lies with the thermocouple, the tiny electrode that tells the gas valve to stay on.

THIS IS IMPORTANT:  Your question: How do I become a firefighter in Cleveland Ohio?

How do you start a fire pit without lighter fluid?

If you find yourself without a chimney starter, you can apply a similar method without the added equipment. Simply bunch up a couple pieces of newspaper and place them in the middle of the charcoal grate. Then build the coals up around the paper in a pyramid fashion, light the newspaper, and let it go.

What is a thermocouple on a gas fire pit?

Thermocouple. Some fire pits have a thermocouple which senses the heat from the pilot light flame. That signals the gas valve to stay open when the pilot is on.

How do you light a gas fire pit with a key?

You will control the gas flow with a fireplace key (sometimes called a hex key) as you light the fireplace.

  1. Place a long lighter next to the burner and pull the fuel trigger. …
  2. Turn the key in the slot to open the gas valve. …
  3. Replace the key cover.
  4. Use the key to control the height of the flames.