This is called a Rabbit Tool. It is placed in the door jamb, and you pump the hydraulic cylinder which forces the door open. It can be hand powered, or hooked up to a hydraulic pressure pump.
What are the 3 methods of forcible entry?
There are three basic methods of forcible entry: conventional, through-the-lock and power tools. Having a good working knowledge of each of them is the most important factor.
Is it hard to kick down a door?
It is not actually that easy to kick a real door; the weakest part is usually the door latch, not the wood of the door or the hinges. Aim your kick just below the doorknob to get the maximum effect. If there is a deadbolt it will be much harder.
What tools do firefighters use to open doors?
The adz end can be used to break in through an outward swinging door by forcing the tool between the door and doorjamb and prying the two apart. Other tools in this category include crowbars, flat bars, pry bars, claw tool, the Kelly tool and the pry ax.
Why is it called a rabbit tool?
Years ago, a two-part, hydraulic forcible-entry tool called the “Rabbit Tool” was invented. It was designed to give firefighters a means of easily spreading doors via the use of a portable pump. … When pumped, hydraulic fluid was forced through the hose, causing the spreader to expand and force the door.
What is the weakest part of a door?
A door is usually most vulnerable at its strike plate, its hinges, and its existing lock hardware. Burglars and criminals are prone to attacking these points because that’s where it’s easiest to get in.
Is it possible to kick open a door?
Alright, let’s get this out of the way first: kicking down a door is not the best option for opening a locked door. It will damage the door and cost you lots of money to fix it. It is better to call a locksmith, pick the lock, or attempt to crawl in a window.
How do police break down a door?
The common methods are to use a lever, such as a Halligan bar or crowbar, or to use a tool to concentrate a large amount of force on the door, such as a sledgehammer, hydraulic jack, or battering ram.
What is a Firemans axe called?
The Pulaski was created in the years just following the 1910 Big Burn by U.S. Forest Service Ranger Ed Pulaski, and it continues to be used by wildland firefighters to this day. The tool is a combination of a fire axe and an adze (or hoe), allowing firefighters to chop or dig with the flip of a wrist.
Why is it called a Halligan?
The tool was designed by and named after a New York City Fire Department (FDNY) First Deputy Chief Hugh Halligan in 1948. … Because the device had been invented by one of its members, the FDNY did not initially purchase the tool in order to avoid the appearance of a conflict of interest.
How much does a Halligan weigh?
The Halligan tool comes in two sizes – 30 inches, weighing 10.5 pounds, and 36 inches, weighing 12 pounds. It allows every firefighter force entry, rescue and ventilate without waiting for help.
What is a Flathead axe?
The flathead axe has three essential parts. First, the cutting wedge or blade of the axe, this part is used for cutting and sometimes prying motions. Secondly, the striking face or rear of the axe head. On the flathead axe, the back of the axe is flattened and serves as a striking tool much like a sledgehammer.
What is a Halligan bar used for?
Though the Halligan tool was originally conceived of as a forcible entry tool, its versatility has led to recognition for a range of emergency applications. In addition to locked doors, the Halligan can be used to open padlocks and break chains.
What is the difference between a hooligan and a Halligan?
A Halligan bar (also called a Halligan tool or Hallagan, and is often referred to as a Hooligan Tool in various British and Australian fire services) is a forcible entry tool used by firefighters and law enforcement. One variant of the Halligan has a heavy sliding collar on the shaft.