To activate the fire alarm throughout the building, you must pull the smaller inner pull station lever. (Again take care to not activate any pull station labeled as “Clean Agent” unless it is intended to do so.)
What is the correct way to respond to a fire alarm?
When the fire alarm sounds in your building: Immediately evacuate the building to the outside. NEVER go back to retrieve personal belongings. Move away from the front of the building to allow the fire fighters and their trucks to access the building.
What is fire alarm system and how it works?
A fire alarm system warns people when smoke, fire, carbon monoxide or other fire-related emergencies are detected. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations.
What are the 4 basic parts of fire alarm?
What Are the Basic Components of Fire Alarm & Detection Systems?
- Fire alarm initiating devices.
- Fire notification devices.
- Fire alarm control panel.
- Primary power supply.
- Backup power supply.
What’s the difference between a smoke detector and a fire alarm?
Put simply, a smoke alarm detects smoke and sounds an alarm. … Put simply, a smoke detector senses smoke only and must be connected to a fire alarm system control panel. Smoke detectors are a detection device only – not an alarm.
What are the 2 types of fire alarms?
There are two types of smoke alarms in general use for home smoke alarms: photoelectric and ionization. These smoke alarms sense the presence of smoke differently. The type of smoke produced by a fire depends on the type of fire. Flaming fires produce a different type of smoke than smoldering fires.
What are the things to do when you hear a fire alarm?
If you hear a fire alarm:
- STOP WORK AND EVACUATE THE BUILDING.
- Follow the EXIT Signs. …
- Use stairs. …
- Keep fire doors in stairways closed. …
- Evacuate and proceed until you are outside of the building.
- Walk at a normal pace. …
- Wait outside until “All Clear” is announced by Security personnel.
What is the first thing you should do when you hear a fire alarm?
This is an emergency situation, so as soon as you hear a fire alarm, get yourself out of your seat and exit the building via the fire exits as quickly as possible. Fire spreads fast, and you don’t always know how long you’ve got before your means of escape are blocked.
What do you do when your fire alarm goes off at work?
Everyone must evacuate the building by way of the safest and closest exit and/or stairway. Never use an elevator to exit during a fire alarm activation. Once outside the building, move away from the building. Assemble across the street or along the sidewalk of the adjacent building.
What is fire alarm necessary?
Fire alarms are important because they can give you an early signal to something that could be tragic – basically saving your lives. A fire alarm alerts you when they you are busy, working or sleeping. … Make sure to also alert your family and friends on the importance of installing fire alarm systems.
Where is a fire alarm system required?
California law requires smoke alarms (previously referred to as “smoke detectors” in the law) to be installed in every “dwelling intended for human occupancy.” The specific requirements may vary depending on the type of property, the number of units and the number of stories of the property.
What are the 3 main parts of an alarm system?
Alarm System is a security system consists of 3 parts alarm units. They are detectors, alarm control panel and CMS.
What are typical inputs in a fire alarm system?
The system inputs consist of fire detection devices and system monitoring devices that activate the control panel and the outputs are responsible for occupant notification and control functions associated with life safety.