What are the five steps of using a fire extinguisher?

What are the 5 main types of fire extinguishers?

When it comes to the types of fire extinguishers, there are five main types including wet chemical, CO2, dry powder, foam and water.

What are the proper steps to use a fire extinguisher list them in order?

PASS, which stands for pull, aim, squeeze, and sweep, is the four-step method for using most fire extinguishers. In this order: Pull the pin. Hold the extinguisher away from you, and release the locking mechanism.

What are the 4 stages of a fire?

Compartment fire development can be described as being comprised of four stages: incipient, growth, fully developed and decay (see Figure 1).

What are the five types of fires?

Fire is divided into five classes (A, B, C, D, and K) that are primarily based on the fuel that is burning. This classification system helps to assess hazards and determine the most effective type of extinguishing agent.

THIS IS IMPORTANT:  You asked: Can you have a bonfire at Coronado beach?

What is the four 4 step process to using a fire extinguisher?

For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly.

What are the steps for using a fire extinguisher Brainly?

It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher.

What are the 4 types of fire extinguishers?

There are four classes of fire extinguishers – A, B, C and D – and each class can put out a different type of fire.

  • Class A extinguishers will put out fires in ordinary combustibles such as wood and paper.
  • Class B extinguishers are for use on flammable liquids like grease, gasoline and oil.

Which of the following is the first step to perform when you discover a fire?

Pull the fire alarm and call for help. Alert people in the area to begin evacuation. Assist those with disabilities. Close doors to confine the fire.

What is in a fire extinguisher?

The most common agents used in dry chemical fire extinguishers are monoammonium phosphate and sodium or potassium bicarbonate. … But before you do, you need to know specifically what type of dry chemical agent was used.

How many stages are there of a fire?

of fire, how fire develops and significant events which can occur during a fire. Traditional Fire growth in a room can be divided into three distinct stages: the growth stage (incipient), the fully developed stage (free-burning), and the decay stage (smoldering).

THIS IS IMPORTANT:  Frequent question: Can you use VoIP for fire alarm?

What stage can a fire be controlled with an extinguisher?

The incipient stage is the beginning of a fire that can be extinguished or controlled by portable firefighting equipment.

What are the 10 phases of fire?

A welltrained fire fighter knows that there are many phases in a structural fire fighting operation, including rescue, exposure protection, attack, ventilation, confinement, extinguishment, salvage and overhaul.