The yellow diamond, appearing at the right side of the label, conveys Reactivity (or Stability) information. The numbers 0 to 4 are also used to rank reactivity hazards, as follows: The white diamond, appearing at the bottom of the label, conveys Special Hazard information.
What area in the diamond of the NFPA chemical hazard label provides information on the flammability of the material?
The red diamond, appearing at the top of the label, conveys Flammability Hazard information. Again, the numbers 0 to 4 are used to rate the flammability hazard, as follows: 0-Will not burn.
What area color in the NFPA chemical hazard label provides information on the chemical reactivity of the material?
The system uses a color-coded diamond with four quadrants in which numbers are used in the upper three quadrants to signal the degree of health hazard (blue), flammability hazard (red), and reactivity hazard (yellow).
What does each of the four colored sections in the NFPA label indicate?
The four bars are color coded, using the modern color bar symbols with blue indicating the level of health hazard, red for flammability, orange for a physical hazard, and white for Personal Protection. The number ratings range from 0-4. The Health section conveys the health hazards of the material.
What does the number 4 in the blue diamond mean?
The numbers superimposed over the colors rank the severity or danger, ranging from one to four, with four being the highest rating. The blue indicates potential health effects. A four in the blue means severe and immediate health effects, including death, and a one time exposure can cause lasting health problems.
Where should NFPA diamonds and labels be?
Positioning NFPA Diamond Labels
In general, it goes on the upper half of the truck so that it is the most visible, but that is not strictly required. When placing labels on containers, it is simply necessary to place them in such a way as to ensure they are easily visible.
What are the 4 categories of identification for NFPA diamonds?
These color codes help emergency responders know about potential health, fire, and chemical instability issues. The NFPA 704 diamond sign used to display this information has four colored sections: blue, red, yellow, and white. Each section is used to identify a different category of potential hazards.
What does the white color on the NFPA diamond stand for?
The four divisions are typically color-coded with red on top indicating flammability, blue on the left indicating level of health hazard, yellow on the right for chemical reactivity, and white containing codes for special hazards.
What does the white diamond in the NFPA diamond stand for?
The white diamond, appearing at the bottom of the label, conveys Special Hazard information. This information is conveyed by use of symbols that represent the special hazard.
What are the four colors of a NFPA safety diamond and what does each color represent?
The NFPA diamond is made up of four smaller diamonds that each have a different meaning and rating. The four smaller diamonds are red,blue,white and yellow. Each color stands for a different category they are health,flammability,reactivity and special.
How do you read hazard diamonds?
The number corresponds to the level of danger a chemical poses. The lower the number, the lower the hazard. The numbers range from zero to four, with zero representing no hazard at all, and four representing an extreme hazard. Each number also has a specific meaning based on which diamond it is in.
What are the five NFPA hazard categories?
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) RATING SYSTEM
Chemical substances are rated for degree of HEALTH RISK (blue diamond), FLAMMABILITY (red diamond), REACTIVITY (yellow diamond), on a scale of 0 to 4.
What is the hazard diamond called?
NFPA 704, also known as a fire diamond, is a diamond-shaped sign or picture that tells people about the hazards of a chemical compound. It was designed in 1960 by the National Fire Protection Association, as a way of quickly telling firefighters and other emergency workers what kind of dangers might be nearby.
Which number on the NFPA chemical hazard label indicates the greatest hazard?
Number System: NFPA Rating and OSHA’s Classification System 0-4 0-least hazardous 4-most hazardous 1-4 1-most severe hazard 4-least severe hazard • The Hazard category numbers are NOT required to be on labels but are required on SDSs in Section 2.
What is a NFPA label?
The NFPA diamond label is used to warn firefighters and other emergency responders of the hazards they would be exposed to in a fire or chemical spill situation. Colors indicate the type of hazard. Numbers indicate the degree of hazard. 0 = Materials that offer no hazard beyond that of ordinary combustible materials.
What do the numbers on a hazard label represent?
On every NFPA label, there should be a number from zero to four inside the blue, red and yellow areas. The numbers indicate the degree of a particular hazard. The substance is a severe health risk if the substance is not handled safely.